• UL and CUL listed; UL and 10C fire rated.                     
  • ANSI A 156.4 Grade 1 certified.                                    
  • Barrier free operation to comply with Federal Accessibility.  
  • Adjustable spring power size 1-6. 
  • Cast iron body, forged steel arm.
  • Standard adjustable sweep and latching speed.
  • Standard adjustable backcheck.
  • Standard tri-packed for regular arm, top jamb and parallel arm bracket.
  • Standard self taping and drilling screws.
  • Plastic cover.
  • Sex bolts.
  • Lifetime warranty

Finishes:
•   AL (Alum)
•   DU (Duro)
•   BK (Black)

DESCRIPTION DIMENSIONS DESCRIPTION DIMENSIONS
A. Length of Closer Body 11″ (280 mm) D. Closer Body Height 2¾″ (70 mm)
B. Horizontal Mounting Holes 1″ (25.4 mm) E. Projection from Door 2″ (51 mm)
C. Vertical Mounting Holes 2¼″ (57 mm) F. Arm Shoe Spacing 115/16″ (49.2 mm)

SCH8416-A1 Door Closer Drop Plate
For top jamb installations where the ceiling is level with the
top of the header. Requires a minimum 1 ¾″ header height.

SCH8416-A1 Door Closer Drop Plate
Specs & Drawing

SCH8416-A2 Door Closer Drop Plate
For top jamb installation on door
headers less than 3 ½″ in height.

SCH8416-A2 Door Closer Drop Plate
Specs & Drawing
SCH8416-A3 PARALLEL ARM DROP PLATE
For parallel arm installation on door rails less than 5 ½″ (measured
down from the door stop). Required a 2″ minimum height top door rail.

SCH8416-A3 PARALLEL ARM DROP PLATE
Specs & Drawing

SCH8416-A4 STANDARD DROP PLATE
For pull side installation when the top door rail is less
than 3 ¾″. Requires a 2″ minimum height door rail.


SCH8416-A4 STANDARD DROP PLATE
Specs & Drawing

SCH8416HDARM Heavy-Duty Arm
Adjustable and available in three finishes (AL, DU, BK).
Designed to be used with SCH8416BC closers.

Heavy-Duty Arm
Specs & Drawing

SCH8416HDHOARM Heavy-Duty Hold-Open Arm
Adjustable and available in three finishes (AL, DU, BK).
Designed to be used with SCH8416BC closers.

Heavy-Duty Hold-Open Arm
Specs & Drawing
SCH8416HDCUHOARM Heavy-Duty Hold-Open Cush Arm
Adjustable and available in three finishes (AL, DU, BK).
Designed to be used with SCH8416BC closers.

Heavy-Duty Hold-Open Cush Arm
Specs & Drawing

SCH8416HDCUARM Heavy-Duty Cush Arm
Adjustable and available in three finishes (AL, DU, BK).
Designed to be used with SCH8416BC closers.

Heavy-Duty Cush Arm
Specs & Drawing

DOOR CLOSERS SCH8416 CROSS REFERENCES
SCH AMERICAN EAGLE CORBIN RUSSWIN DESIGN HARDWARE DOR-O-MATIC HAGER LCN NORTON SARGENT YALE
SCH8416 7100 DC3000/DC6200 1070/1370 1600 900 4040 50 281/350 4400