SCH5930F Fire-Rated SVR Exit Device For Wide Stile Fire Labeled Doors – SCH Products (Superior Commercial Hardware Products)

For use on all single doors or double doors where two-point latch is desirable (inactive) leaf of double door in specialty). Fire-rated devices must be used on 4′ x 8′ (1219 mm x 2438 mm) single or 8′ x 8′ (2438 mm x 2438 mm) double fire-labeled doors.
Fits for 1 ³/₄″ (44.45 mm) thick standard RHR or LHR hollow metal doors & wood doors, other than standard 1 ³/₄″ (44.45 mm) is available but specify door thickness when
Minimum Door Stile Width: 3 ¹/₂″ (90 mm).

Device Head Cover—
Device Head Cover nonferrous alloy

Chassis —
Steel,plated

Mechanism Housing —
Steel, stainless steel

Push Bar —
Steel, stainless stee

End Cap —
Steel, stainless stee

Latch Bolts —
100% stainless steel Less dogging 1/2″ (13 mm) throw

Vertical Rods —
Tubular aluminum with rod guide

Handing —
Non-handed

Mounting Fasteners —
Machine screws furnished standard
Sex Nut and Bolt (SNB) are required to use for wood doors. Order SNB separately

Dogging* —
Hex Key dogging standard Less dogging – See page ACCESSSORIES

Finish —
605, 630, 689, 690, four finishes

Dimension —
See page DIMENSIONS

Device Length —
See page DIMENSIONS

UL Listed —
For Panic Hardware and Fire Exit Hardware

SCH534 Top Strike
Applied to surface of stop.
Hardened steel, plated

SCH537 Bottom Strike
Applied to surface of floor.
Nonferrous alloy, plated

Parts Name

Auxiliary Guarded Latch
Latch Bolt
Chassis Cover (or called Head Cover)
Push Bar
Dogging Plate
End Cap
Mechanism Housing ( or called Device Body)
Top Latch
Latch Assembly Cover
Top Vertical Rod
Rod Guide
Chassis
End Cap Bracket
Bottom Vertical Rod
Bottom Latch

Device Length
The device lengths are precut for 36″ and 48″ wide door use (standard shipping size),no additional cutting is necessary.

Short 36″: Device Length is 33 ¹⁵/₃₂″ (850 mm) for 3′ door use, with short push bar. Long 48″: Device length is 44-3/4″ (1137 mm) for 4′ door use, with long push bar.

For narrow door installation, cut device “A” portion to door width minus 2″ minimum to fit properly.

Our standard vertical rod accomodate 7′ panic exit doors or 8′ fire doors, specify door height if greater than standard size when ordering one special longer top rod_will be furnished.