A Heavy Duty commercial quality deadbolt that provides a maximum deterrent to forced entry. The cylinder recesses into the door to resist blows attempting to move the lock.

  • 2 1/2″ dia solid steelone-piece design security ring insert. exceeds ANSI Grade 1 certificate and UL 3 hours certificate security against hammer and crowbar prying attacks exceeding 800,000 cycles.
  • 1″ (25.4 mm) deadbolt with hardened steel core exceeds ANSI Grade1 Security against kick-in and saw attacks.
  • High precision pick resistant solid brass 6 pin tumbler plug “C”. Brass key Meets ANSI Grade 1 Security to prevent key cylinder from being knocked out.
  • Drive in deadbolt Designed to be installed on metal door conveniently. Only one hole is needed on door edge.
  • Salt Spray testing can reach 200 hours.
  • ADA Ergonomic thumb turn.
  • Extra thick steel mounting plate, for door thickness 1 9/16 ~ 2 3/8″ (40 ~ 50 mm)
  • Sturdy, all steel latch case and mechanism.
 

Finishes Available:

  • PB – Polished Brass
  • SB – Satin Brass
  • AB – Antique Brass
  • AC – Antique Copper
  • SN – Satin Nickel
  • SC – Satin Chrome
  • CR – Polished Chrome
  • ORB – Oil Rubbed Bronze
  • TB – Black Nickel


Door Prep Cross bore: 2 1/8″ (54 mm); Edge bore: 1″ (25.4 mm). Latch face 1″ x 2 1/4″ (25.4 mm x 57 mm).
Backset Standard: 2 1/4″ (57 mm); Optional: 2 3/8″ (60 mm).
Door Thickness Adjustable for 1 3/8″ ~ 2″ (35 mm ~ 51 mm).
Cylinder 5- or 6-pin with removable core; compatible with Schlage “C” keyway or Kwikset keyway and other options available.
Face plates 1″ x 2 1/4″ (25.4 mm x 57 mm) square comer (standard). Round corner and other options available.
Strikes 1 1/8″ x 2 3/4″ (29 mm x 70 mm) square corner (standard). Round corner and other options available.
Set 1-inch throw. Nickel plated.
ANSI/BHMA A156.5 Grade 1.